新葡澳京(中国)唯一官方网站-Macau Green Shop

SDA/SDS High Efficiency Desulfurization Technology

Relying on the Institute of Thermal Energy Engineering of Zhejiang University, Pyneo has established ZJU-Pyneo Technology Joint R&D Center for Energy Saving and Emission Reduction, and has an independent flue gas purification test platform. SDA and SDS are advanced and efficient desulfurization technologies, which is independently researched and developed by Pyneo.

主要内容

Efficient SDA desulfurization technology

SDA means spray drying absorption, and SDA high-efficiency desulfurization technology is rotary spray drying desulfurization absorption technology, which mainly includes slaked lime slurry curing preparation system, SDA spray absorption system, bag dust removal, pneumatic conveying and by-product warehouse, etc. The core equipment is SDA spray device, gas distribution device, reactor and bag dust collector.

Efficient SDS desulfurization technology

SDS means sodium-based dry desulfurization. SDS high-efficiency desulfurization technology uses sodium bicarbonate (baking soda) as deacidifying agent to absorb and remove acid gases such as SO₂, HCl and HF in flue gas. It includes sodium bicarbonate grinding and pulverizing system, SDS spray absorption system, bag dust removal system, pneumatic conveying system and by-product warehouse, etc. The core equipment is grinding and pulverizing device, SDS spray device and bag dust collector.

详细介绍

技术特点
流程图
技术优势

Efficient SDA desulfurization technology
The flue gas enters the spray drying tower, and contacts with the absorbent droplets atomized by the spray device. The absorbent droplets fully contact with the acid components in the flue gas, absorbing and removing acid gases such as SO₂, HCl and HF. After the flue gas is deacidified, it enters the dust collector (electrostatic precipitator or bag filter) for dust removal, and then it is discharged.
Efficient SDS desulfurization technology
Due to transportation and storage, the raw materials of sodium bicarbonate in the market are usually coarse particles (d50 is about 150-200 μm). To achieve high reactivity, the adsorbent must have a large specific surface area. Therefore, before being injected into the flue reactor, the sodium bicarbonate must be ground so that the fineness of sodium bicarbonate can meet the requirement of d90<20µm.

SDA工艺流程图.png

SDA工艺流程图

SDS工艺流程图.png

SDS工艺流程图

Efficient SDA desulfurization technology

The desulfurization efficiency is as high as 80-95%, and the by-products have good fluidity and are easy to treat. It is not affected by boiler operation and has good operation flexibility; Can quickly adapt to the changes of flue gas flow, composition and concentration; Low water consumption and no sewage; The system is simple, the workload of operation and maintenance is small, and the operation and maintenance cost is low; The absorption tower and its downstream equipment will not be stuck or blocked, and there is no need for corrosion protection; It has a high removal rate for SO₃, HCl, HF and other acidic substances, and spraying activated carbon can remove dioxins and heavy metals.

Efficient SDS desulfurization technology

Dry system, without water consumption; Low investment, small floor area and simple technological process; Low energy consumption, no corrosion and low maintenance cost; The desulfurization efficiency can be arbitrarily and rapidly adjusted within the range of 90-98 % according to the original SO₂ concentration and load. The by-product, desulfurization ash (sodium sulfate), can be recycled; It has a high removal rate for SO₃, HCl, HF and other acidic substances, and spraying activated carbon can remove dioxins and heavy metals.